Editor’s Note: This post highlights data from Webb science in progress, which has not yet been through the peer-review process.
NASA’s James Webb Space Telescope captured its first
images and spectra of Mars Sept. 5. The telescope, an international
collaboration with ESA (European Space Agency) and CSA (Canadian Space Agency),
provides a unique perspective with its infrared sensitivity on our neighboring
planet, complementing data being collected by orbiters, rovers, and other
telescopes.
Webb’s unique observation post nearly a million miles
away at the Sun-Earth
Lagrange point 2 (L2) provides a view of Mars’
observable disk (the portion of the sunlit side that is facing the telescope).
As a result, Webb can capture images and spectra with the spectral resolution
needed to study short-term phenomena like dust storms, weather patterns,
seasonal changes, and, in a single observation, processes that occur at
different times (daytime, sunset, and nighttime) of a Martian day.
Because it is so close, the Red Planet is one of the
brightest objects in the night sky in terms of both visible light (which human
eyes can see) and the infrared light that Webb is designed to detect. This
poses special challenges to the observatory, which was built to detect the
extremely faint light of the most distant galaxies in the universe. Webb’s
instruments are so sensitive that without special observing techniques, the
bright infrared light from Mars is blinding, causing a phenomenon known as
“detector saturation.” Astronomers adjusted for Mars’ extreme brightness by
using very short exposures, measuring only some of the light that hit the
detectors, and applying special data analysis techniques.
Webb’s first images of Mars, captured by the Near-Infrared Camera (NIRCam),
show a region of the planet’s eastern hemisphere at two different wavelengths,
or colors of infrared light. This image shows a surface reference map from NASA
and the Mars Orbiter Laser Altimeter (MOLA) on the left, with the two Webb
NIRCam instrument field of views overlaid. The near-infrared images from Webb
are on shown on the right.
Webb’s first
images of Mars, captured by its NIRCam instrument Sept. 5, 2022 [Guaranteed
Time Observation Program 1415]. Left: Reference map of the observed hemisphere
of Mars from NASA and the Mars Orbiter Laser Altimeter (MOLA). Top right:
NIRCam image showing 2.1-micron (F212 filter) reflected sunlight, revealing
surface features such as craters and dust layers. Bottom right: Simultaneous
NIRCam image showing ~4.3-micron (F430M filter) emitted light that reveals
temperature differences with latitude and time of day, as well as darkening of
the Hellas Basin caused by atmospheric effects. The bright yellow area is just
at the saturation limit of the detector. Credit: NASA, ESA, CSA, STScI, Mars
JWST/GTO teamThe NIRCam
shorter-wavelength (2.1 microns) image [top right] is dominated by reflected
sunlight, and thus reveals surface details similar to those apparent in
visible-light images [left]. The rings of the Huygens Crater, the dark volcanic
rock of Syrtis Major, and brightening in the Hellas Basin are all apparent in
this image.
The NIRCam longer-wavelength (4.3
microns) image [lower right] shows thermal emission – light given off by the
planet as it loses heat. The brightness of 4.3-micron light is related to the
temperature of the surface and the atmosphere. The brightest region on the
planet is where the Sun is nearly overhead, because it is generally warmest.
The brightness decreases toward the polar regions, which receive less sunlight,
and less light is emitted from the cooler northern hemisphere, which is
experiencing winter at this time of year.
However, temperature is not the only
factor affecting the amount of 4.3-micron light reaching Webb with this filter.
As light emitted by the planet passes through Mars’ atmosphere, some gets
absorbed by carbon dioxide (CO2) molecules. The Hellas Basin – which is the largest
well-preserved impact structure on Mars, spanning more than 1,200 miles (2,000
kilometers) – appears darker than the surroundings because of this effect.
“This is actually not a thermal effect
at Hellas,” explained the principal investigator, Geronimo Villanueva of NASA’s Goddard Space
Flight Center, who designed these
Webb observations. “The Hellas Basin is a lower altitude, and thus experiences
higher air pressure. That higher pressure leads to a suppression of the thermal
emission at this particular wavelength range [4.1-4.4 microns] due to an effect
called pressure broadening. It will be very interesting to tease apart these
competing effects in these data.”
Villanueva and his team also released
Webb’s first near-infrared spectrum of Mars, demonstrating Webb’s power to
study the Red Planet with spectroscopy.
Whereas the images show differences in
brightness integrated over a large number of wavelengths from place to place
across the planet at a particular day and time, the spectrum shows the subtle
variations in brightness between hundreds of different wavelengths
representative of the planet as a whole. Astronomers will analyze the features
of the spectrum to gather additional information about the surface and
atmosphere of the planet.
Webb’s first
near-infrared spectrum of Mars, captured by the Near-Infrared Spectrograph
(NIRSpec) Sept. 5, 2022, as part of the Guaranteed Time Observation Program
1415, over 3 slit gratings (G140H, G235H, G395H). The spectrum is dominated by
reflected sunlight at wavelengths shorter than 3 microns and thermal emission
at longer wavelengths. Preliminary analysis reveals the spectral dips appear at
specific wavelengths where light is absorbed by molecules in Mars’ atmosphere,
specifically carbon dioxide, carbon monoxide, and water. Other details reveal
information about dust, clouds, and surface features. By constructing a
best-fit model of the spectrum, by the using, for example, the Planetary
Spectrum Generator, abundances of given molecules in the atmosphere can be
derived. Credit: NASA, ESA, CSA, STScI, Mars JWST/GTO team
This infrared spectrum was obtained by
combining measurements from all six of the high-resolution spectroscopy modes
of Webb’s Near-Infrared
Spectrograph (NIRSpec).
Preliminary analysis of the spectrum shows a rich set of spectral features that
contain information about dust, icy clouds, what kind of rocks are on the planet’s
surface, and the composition of the atmosphere. The spectral signatures –
including deep valleys known as absorption features – of water, carbon dioxide,
and carbon monoxide are easily detected with Webb. The researchers have been
analyzing the spectral data from these observations and are preparing a paper
they will submit to a scientific journal for peer review and publication.
In the future, the Mars team will be
using this imaging and spectroscopic data to explore regional differences
across the planet, and to search for trace gases in the atmosphere, including
methane and hydrogen chloride.
These NIRCam and NIRSpec observations of Mars were conducted as part of Webb’s Cycle 1 Guaranteed Time Observation (GTO) solar system program led by Heidi Hammel of AURA.
-By Margaret Carruthers, Space Telescope
Science Institute
Source: Mars Is Mighty in First Webb Observations of Red Planet – James Webb Space Telescope (nasa.gov)
No comments:
Post a Comment