Vials
of seawater, Great Salt Lake water, nickel sulfate, copper chloride wastewater,
and desalinated water, along with recovered salts show how a new approach
developed by URochester researchers turns natural and industrial waters into
fresh water and reusable minerals. Credit: University of Rochester / J. Adam
Fenster
The
United Nations estimates that 2.2 billion people lack safely managed drinking
water, and communities from California to the Middle East rely on desalination
plants to convert ocean water to fresh water. Common desalination techniques
such as reverse osmosis and thermal distillation are energy-intensive, require
pre- and post-water treatment, and leave behind a concentrated saltwater
byproduct called brine that wreaks havoc on sea life when it's deposited back
into the ocean by raising the salt level and lowering oxygen in the water.
But a novel approach developed at the
University of Rochester offers a way to overcome these drawbacks. Researchers
at URochester's Institute of Optics developed a new solar-thermal desalination
process to produce fresh water in an energy-efficient way that does not leave
behind brine and requires no chemical additives to pre-treat the water.
A team led by Chunlei Guo, a professor
of optics and of physics and a senior scientist at URochester's Laboratory for
Laser Energetics, describes their method in a paper published in Light:
Science & Applications.
The technology uses solar panels made of
black metal etched with femtosecond lasers to make the surface super
light-absorbing and superwicking—or extremely attractive to water.
The panels have a laser-treated active region that pulls a thin layer of water across the surface, absorbs nearly all solar radiation, distills the water, and deposits the leftover salts and minerals into the panel's untreated sides or "passive" region so that the salt does not clog the active region and disrupt continuous desalination.
Leveraging the 'coffee ring' effect
Guo says other researchers have
developed solar-thermal desalination techniques that work well in lab
experiments using simulated seawater made of only water and sodium chloride. As
the water evaporates, the sodium chloride crystalizes in a grainy and porous
fashion, allowing water to pass through to dissolve the salt and the solar
panels can be easily cleaned.
But the real ocean has a much more
complex composition, and these systems tend to encounter issues when tested in
the field. Unlike sodium chloride, many other components in seawater, such as
magnesium- and calcium-based materials, crystallize in a crusty and non-porous
fashion on the solar panel's surface, clog it, and eventually water can no
longer seep through.
This is the same phenomenon as your shower head clogging up over time or your tea pot lined with scales, except that seawater contains hundreds of times more salts than your tap water.
In Professor Chunlei Guo's lab at the
University of Rochester, researchers developed a solar desalination device
featuring laser-etched superwicking black metal, a technology that produces
fresh water from seawater while capturing salts and minerals instead of
generating harmful brine waste. Credit: University of Rochester / J. Adam
Fenster
To keep their solar panel surface
from gumming up in a similar way, Guo's team precisely etched the black metal's
grooves so the various salts and minerals in ocean water would simply slough
off. They also leveraged a physical phenomenon that has plagued clumsy
javaphiles for centuries: the coffee ring effect.
"If you drop coffee on a
surface, eventually the water evaporates and there's a ring left at the outer
edge that is the concentrated coffee particles ," says Guo. "We use
that same principle to advance the salts to the passive region."
Testing their solar-thermal
desalination technique using samples of water from the Pacific, Atlantic, and
Indian Oceans, Guo and his team were able to make the surface self-cleaning so
that it extracted freshwater and directed the remaining salts to the passive
region where they could be later collected without reducing the panel's
efficiency.
Turning waste into resources
One of the new method's distinct
advantages is that instead of leaving behind brine that must be disposed of or
processed, it extracts nearly 100% of the salts in solid form. This could not
only produce an abundant supply of table salt, but it could also be used to
extract more precious minerals, including lithium, which is used in the
lithium-ion batteries that power electric vehicles and other electronics.
In a related paper in the Journal of Materials Chemistry A, Guo and his colleagues show how they can use the
same superwicking solar panels to separate lithium from the rest of other salts
in desalination. Embedding nanoparticles made of hydrogen titanate in the tiny
grooves of the black metal surface isolates the lithium from other salts and
minerals.
"Mining lithium from the earth
has proven to be very taxing from an energy and environmental standpoint, so
pulling lithium directly from saltwater could be a very important future
route," says Guo.
Using water samples from Great Salt
Lake, the researchers were able to extract about 50% of the lithium from the
salts left behind by the desalination process.
Guo says now that the superwicking desalination technology has been demonstrated in proofs of concept on small-scale devices, he sees the technology as inherently scalable, capable of improving global access to drinking water and building more sustainable supply chains for precious minerals.
Provided by University of Rochester
Source: Solar-powered desalination system turns ocean water into drinking water, without waste


No comments:
Post a Comment